auteltech
image 0
image 0

MaxiLink ML519

The MaxiLink ML519 OBD II/EOBD Scanner supports all 10 modes of OBD II testing for complete vehicle diagnostic scan. Featuring the patented One-Click I/M Readiness Key, TFT color display and built-in speaker, the MaxiLink ML519 is a powerful, yet, affordable code reader that enables technicians to quickly detect vehicle faults.

  • image 0

Compatible with domestic, Asian and European vehicles, 1996 and newer vehicles (OBD II & CAN)


Features the patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification


• Color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification


Easily determines the cause of the Check Engine Light (MIL)


• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) codes and pending codes


Turns off Check Engine Light (MIL), clears codes and resets monitors


• Enhanced OBD II Mode 6 – On-board Monitoring Test Results for Specific Monitored Systems


Views freeze frame data


• Reads live PCM datastream


Supports for the new extended sensor list (including the SAE-J1979 protocol)


Graphs data


Reads, stores & plays back live sensor data


• Troubleshooter code tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time


Memory backup for off-vehicle data review and analysis


Internet updatable


• Print data via Windows-based PC

DisplayTFT color display (320x240 dpi)
Operating Temp0 to 60 ℃ (32 to 140 ℉)
Storage Temp-20 to 70 ℃ (-4 to 158 ℉)
Power8.0 to 18.0 V provided via the vehicle battery
Dimensions (LxWxH)199 mm (7.83") x 104.5 mm (4.11") x 37.5 mm (1.48")
Weight280 g (0.62 lb. without wire) 484 g (1.07 lb. with wire)
  • Description
  • Compatible with domestic, Asian and European vehicles, 1996 and newer vehicles (OBD II & CAN)


    Features the patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification


    • Color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification


    Easily determines the cause of the Check Engine Light (MIL)


    • Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) codes and pending codes


    Turns off Check Engine Light (MIL), clears codes and resets monitors


    • Enhanced OBD II Mode 6 – On-board Monitoring Test Results for Specific Monitored Systems


    Views freeze frame data


    • Reads live PCM datastream


    Supports for the new extended sensor list (including the SAE-J1979 protocol)


    Graphs data


    Reads, stores & plays back live sensor data


    • Troubleshooter code tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time


    Memory backup for off-vehicle data review and analysis


    Internet updatable


    • Print data via Windows-based PC

  • Specifications
  • DisplayTFT color display (320x240 dpi)
    Operating Temp0 to 60 ℃ (32 to 140 ℉)
    Storage Temp-20 to 70 ℃ (-4 to 158 ℉)
    Power8.0 to 18.0 V provided via the vehicle battery
    Dimensions (LxWxH)199 mm (7.83") x 104.5 mm (4.11") x 37.5 mm (1.48")
    Weight280 g (0.62 lb. without wire) 484 g (1.07 lb. with wire)
  • Video
  • Comparison
  • Downloads
  • Accessories